If your project has lots of flat surfaces, grab your random-orbit sander again, along with a fine rubbing pad. Sand the surface of your wood very lightly to remove all hardened dust specks and bumps, then place a 6" x 6" fine-grade rubbing pad on the wood with the random-orbit sander on top. Work over the entire surface until everything has an ultra-smooth, matte finish. Switch to a superfine rubbing pad and repeat if you want a gloss.
The only thing shinier than the wood will be your smile.
INSTRUCTIONS
1. Use a random-orbit sander with a 120- or 150-grit disc for initial sanding. Carpet or a pad on the workbench prevents scratches on the workpiece.
2. Brush on water-based urethane.
3. A quarter-sheet sander removes raised grain.
4. For the most durable finish, apply four coats, sanding between each. As a final touch, work your random-orbit sander back and forth with a superfine rubbing pad
Read more in Woodworking Projects and Techniques
0 Comment