 | Secure the lattice to the front upright using corrosion-resistant nails. |
 | Clamp the lattice assembly into place. |
 | Use a hole saw to drill a large-diameter hole from the outside of the fence to recess a large washer and a galvanized lag bolt and secure the lattice assembly in place. |
 | Using a mitre saw, cut and mitre some trim pieces to go around the perimeter of the lattice, but inside the front uprights. |
 | Nail the trim in place with outdoor-rated hardware. |
Woodworking Projects - Outdoor Furniture
Embellish a basic fence with a wooden trellis
- Page 1: Build a trellis for your yard
- Page 2: HVLP spraying; getting started
- Page 3: Assembling the lattice
- Page 4: Assembling the stringer
0 Comment