Finally, screw on the bottom from below, locating at least one of the #8 x 1 1/4" screws in the edge of the back panel. Be sure to predrill first, since white oak is quite brittle. Sand all edges, then ease the corners with a sanding block wrapped with 150-grit sandpaper.
You could apply one of many types of finishes; just be sure to choose one that seals the surface well. I coloured my desktop organizer with a Goudy stain called San Miguel, then sealed the surfaces with three coats of lacquer, sanding between coats with 240-grit paper.
Now that your desktop organizer is finished, go the extra mile before you wrap it: head to the stationery store for some nice pens and paper.
Read more in Woodworking Projects and Furniture Plans
0 Comment